Jetvision Radarcape - Software Maintenance; Flight Route Database Update; Aircraft Type Database Update; Open Glider Net Database Update

4. Go to Con guration > Software Maintenance to check the
 ight routes database, basestation database and Open Glider
Net database auto update functions.
The basestation database contains the registration and the
type of an aircraft.
The  ightroutes database contains the origin and the destination
of a  ight.
It is necessary to update these databases because otherwise
this information will not be shown on the Aircraft Data pages.
As we try to improve the Radarcape software continuously, the
latest software version can be found here:
http://wiki.modesbeast.com/Radarcape:Installation_Guide