20
How to use the software 7.4
7.4.1 Start the software
The software can be started by the following method.
(1) Start from the Start button.
(1) Select [Start > All Programs > JFE Advantech > FT-Calib > FT-Calib].
(2) The software starts.
(2) Double-click the icon on Desktop.
(1) Double-click the [FT-Calib] icon on Desktop.
(2) The software starts.
7.4.2 Close the software
The software can be closed by the following method.
(1) Close from the [File] menu.
The software closes when selecting [File > Close].
(2) Close by the [×] button on the title bar.
The software closes when clicking the [×] button.
The data in calibration process will be deleted once you close the software.
Confirm that there will be no problem before closing the software.
The software cannot be closed during communication processes. Close either after
stopping the communication process or after completing the process.
To Next Page
Loading...