JHS8 JHS-A001D - Placement and Installation; Placement

4
Note :
·
Place the machine on flat ground, and keep it far from around things at least 50cm.
·Make sure the socket can be reached fro m machine location.
·Keep the machine stand upright so that compressor can work well.
·
Don’t run t he machine near to gasoline or any other flammable liquids.
·Make sure free access of air-inlet and air-outlet.
·Don’t use spraying agent (such as pesticides , paint) or other fl ammable materials,
otherwise plastic deformation, or even electric damage of the machine may be
caused.
Power supply
· Make sure no damage in plug.
· Don’t u
se connector instead of plug.
·
Insert plug into socket first, then turn on socket switch , press key “POWER” to run
machine.
Please safekeep this user’s manual.
Placement and Installation
Placement
·Place the machine on flat and dry ground, and keep it far from around things at
least
50cm. (fig.1)
(fig.1)