EasyManua.ls Logo

JIC JIC-18 - JIC-18 Charging Instructions; Methods for Charging the Starter

JIC JIC-18
14 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
USER’S MANUAL: JIC-18
INDICATORS
Starter JIC-18 is fitted with 4 indicators to determine residual power.
Full charge lasts about 8 hours.
Press power button to activate indicators.
During device charging the indicators will flash one after another.
All indicators will stop lighting if charging is suspended or stopped.
JIC –18 STARTER CHARGING PROCESS
Connect power supply unit or car adapter to 15V/1А out-
put connector of “JIC” starter and start charging!
1. Through power supply unit
2. Through car adapter
CAR ENGINE STARTING
Step-by-step regulation describing the procedure of a car
engine starting, see in the Quick Starting Guidelines for “JIC” device.
To start a car engine you just need to have “JIC” starter. There is no longer need to wait for help -
“JIC” will save the situation!
Be careful and perform a series of precautionary measures before car engine starting;
First of all, read the Transport Vehicle User’s Manual since the manufacturer can provide specific
actions and precautionary measures referring to your car.
Carefully observe the instructions contained in the Quick starting Guidelines for
“JIC” device and look through User’s Manual for “JIC” device.
Before starting engine make sure that all car electronic equipment is off (radio, lighting etc.).
Make sure that you are in a dry and well ventilated zone. Do not start car engine in the enclosed
space.
1
2
Status of indicators
do not light 1 light 2 light 3 light 4 light
Battery charge (%)
0% 25% 50% 75% 100%
25%50%75%100%