What to do if Jilong 29P415US Water Pump motor runs, but does not pump water?
If the motor runs but the water is not pumped or the water flow is too slow, check for obstructions inside the intake or discharge hose inside the pool wall. Also, ensure that all hose clamps are tightened and inspect all hoses for damage. Another possible solution is to clean or replace the filter cartridge.
What to do if Jilong Water Pump does not operate?
If the pump does not operate, first ensure the power cord is properly plugged into the GFCI outlet. Check the GFCI for proper operation according to the manufacturer's instructions. Also, check for blown fuses or tripped circuit breakers. The motor may be too hot, causing an overload and shutdown.
How to fix Jilong 29P415US Water Pump that loses prime?
To address a pump that loses prime, make sure there are no leaks in the connection hoses. Also, consider cleaning or replacing the filter cartridge.
Visual diagram showing the correct setup and connection of the filter pump to the pool.
Procedure for cleaning and replacing the filter cartridge to maintain pump efficiency.
General| Brand | Jilong |
|---|---|
| Model | 29P415US |
| Category | Water Pump |
| Language | English |
To Next Page
