What to do if Jilong Water Pump motor runs, but does not pump water?
If the motor runs but the water is not pumped or the water flow is too slow, check for obstructions inside the intake or discharge hose inside the pool wall. Also, ensure that all hose clamps are tightened and inspect all hoses for damage. Another possible solution is to clean or replace the filter cartridge.
What to do if Jilong Water Pump does not operate?
If the pump does not operate, first ensure the power cord is properly plugged into the GFCI outlet. Check the GFCI for proper operation according to the manufacturer's instructions. Also, check for blown fuses or tripped circuit breakers. The motor may be too hot, causing an overload and shutdown.
How to fix Jilong 29P416US Water Pump that loses prime?
To address a pump that loses prime, make sure there are no leaks in the connection hoses. Also, consider cleaning or replacing the filter cartridge.
General| Brand | Jilong |
|---|---|
| Model | 29P416US |
| Category | Water Pump |
| Language | English |
Crucial safety guidelines and warnings for operating the filter pump.
Lists and illustrates all parts of the filter pump system.
Step-by-step guide for setting up the filter pump.
Visual representation of the filter pump installation process.
Detailed steps on how to operate the filter pump.
Guidelines for routine maintenance of the pump unit.
Procedures for cleaning and replacing the filter cartridge.
Solutions for common issues encountered with the filter pump.
Details of the limited warranty for the filter pump.
To Next Page
