2.2. Optional accessories
2.3. Selection of accessories
Item
1
2
3
Power cable (for cigarette
lighter socket)
It is used by the device to get power
from the car cigarette lighter socket.
Power cable (for OBD port)
It is used by the device to get power
from the car OBD port.
It can be mounted remotely to monitor
places of your concern.
Peripheral camera
02/Packaging List
2.1. Standard configuration
Memory card
1. The device supports one Micro SD card;
2. The card must be in FAT32 format with a capacity of 16GB to 128GB;
3. The card must be rated Class 10 or higher, or perform A1 or higher;
4. It is recommended to use a memory card from the original manufacturer of
your device to ensure optimal compatibility and stability;
5. Insert the card by the direction shown in the figure to protect the card
against damage;
6. Press the card inward to remove it. If you are removing the card in your car,
use moderate force to ensure that the card is not ejected out to an
inaccessible location;
7. Make sure the SIM card is not inserted into the memory card slot;
8. Memory cards are consumables, which means they have a tested lifespan.
It is recommended that you test the card quarterly to ensure that it is reading
and writing normally, and replace it periodically to protect your video files
from loss;
9. It is recommended to use industrial grade memory cards if the device is used
for a long period of time every day to avoid video recording exceptions caused
by hot weather.
The JC181 series requires a SIM card and a memory card to function its best. You can
purchase the two accessories according to your specific needs, but the following re
quirements must be met:
Name Usage
Item
1
2
3
JC181 unit
Mount base
x 1
x 1
x 1
x 1
x 1
x 3
Card slot protective cover
4 Power cable
5 T6 torx screwdriver
6 M2 screws
Name Qty
T F
3
To Next Page
Loading...
Need help?
General
