Jimi VL103D - Page 13

SOS#
Set SOS
numbers
SOS,A,phone number 1,phone
number 2,phone number 3#
Add SOS phone number.
SOS,D,sequence number 1,
sequence number 2,sequence
number 3#
Delete the phone number according
to the sequence number.
SOS,D,phone number#
Delete the matching SOS phone
number.
SOS#
Check the SOS phone number.
TIMER#
Set the
time
interval
for the
GNSS
module
to send
data
TIMER,T1,T2#
T1=5~18000 or 0, upload interval
when ACC ON, unit: seconds;
0 means no upload; default is 10;
T2=5~18000 or 0, upload interval
when ACC OFF,unit: seconds;
0 means no upload; default is 10.
TIMER#
Check the current parameters of T1
and T2.
RELAY#
Control
the power
and fuel
RELAY,A#
A=0/1;0 means connection,
1 means cut off;default: 0.
RELAY#
Check the status of the control.