Jimi VL103D - Page 14

ADT#
Set
parameters
to upload
voltage
values of
the
external
battery
ADT,A,T#
A=ON/OFF, On/O ffADC data
upload,default: Off
B=5~3600, Default: 600s; Upload
time interval,unit: seconds
ADT,OFF#
Turn off analog data upload
ADT#
Query the ADT port parameters
RESET#
The device
restarts 20
seconds
later after
receiving
the
command.
RESET#
The device would reboot in 20S
after receiving the command.
SPEEDCHECK#
Set and
query the
sudden
speed
change
alert
SPEEDCHECK,ON,M,T,A,D#
M=0/1,alarm reporting method,
0: only GPRS,
1: GPRS+SMS,default: 0
T=1~30, detection duration,
unit: seconds, default: 4
A=10~300(km/h),threshold of
Harsh acceleration speed difference,
default 30
D=10~300(km/h),difference
threshold for sudden brake
deceleration speed, default 50
SPEEDCHECK,OFF#
Turn o ffthe SPEEDCHECK alarm
SPEEDCHECK#
Query the SPEEDCHECK port
parameters