Jimi VL103D - Page 15

SWERVE#
Set and
query the
sharp
cornering
alert
SWERVE,ON,M,A,S,T#
M=0/1/,alarm reporting method,
0: only GPRS,
1: GPRS+SMS, default: 0
A=10~180(degrees),trigger alarm
Angle threshold, default 30
S=10~200(km/h),trigger alarm
Speed threshold, default 60
T=1~30 detection duration,
unit: seconds, default 3
SWERVE,OFF#
Turn o ffthe SWERVE alarm
SWERVE#
Query the SWERVE port
parameters
PULLALM#
Set tamper
alert
PULLALM,ON,M,N,T#
M=0/1/,alarm reporting method,
0: only GPRS,
1: GPRS+SMS, default: 0
N=1~40, Threshold of mean change,
unit:0.1g g:acceleration of gravity,
default 30
T=2~10 The time interval between
power cut-o ffevent (triggered before
rollover) and rollover event,
unit: seconds, default 5
PULLALM,OFF#
Turn o ffthe PULLALM alarm
PULLALM#
Query the PULLALM port
parameters