POWER:
Auto Power Off
For no movement in 30 minutes, the unit will power off.
Or we can set to never sleep mode at below instruction.
Power auto off setting:
1. Press and hold “SET” / “ANGLE” key and enter MENU mode
2. Select “POWER” by “ZERO” and “HOLD” key, press “SET” key to enter Power
mode
3. Scroll “NEVER” or “30MIN” by “ON/OFF” and “HOLD” key
4. Press “SET” key to confirm NEVER or 30MIN (30 minutes) sleep
FACTORY SET:
Restore Factory Setting
When you find that the unit is abnormal, you can restore the unit to factory setting.
All calibration setting will be restored to factory setting.
*Not suggest restore to factory setting in normal status, for accuracy drift, please follow
Calibration. After factory set, please redo calibration to ensure the accuracy.
Restore to factory setting:
1. Press and hold “SET” / “ANGLE” key and enter MENU mode
2. Select “FACTORY SET” by “ZERO” and “HOLD” key, press “SET” key to enter
FACTORY SET mode
3. Scroll “YES” or “NO” by “ZERO” and “HOLD” key
4. Press “SET” key to confirm
To Next Page
Loading...
Need help?
General