Note Switch OFF your phone and disconnect
the charger.
1 To remove back cover, gently pull it using the
indentation at the back side of your phone.
2 Take the battery out.
3 Insert your Jio SIM card into SIM card slot.
SIM Slot It is for Nano SIM card.
4 Insert a memory card into the SD card slot.
SD Slot It is for External memory card
5 To insert the battery, slide it into the
compartment ensuring that the three
terminals match the three contact points on
your phone.
6 Reattach the back cover.
b) Remove Jio SIM card, battery and
memory card
Note Switch OFF your phone and disconnect
the charger.
1 To remove back cover, gently pull it using the
indentation at the back side of your phone.
2 Take the battery out.
3 Take your Jio SIM card out.
4 Take your memory card out.
c) Charge the battery
For the first time, fully charge the battery
before switching ON the JioPhone.
1 Insert the battery into the JioPhone.
Note DO NOT switch on the JioPhone.
2 Plug in one end of the charger to the power
outlet and the other end to the JioPhone.
Note When the battery gets fully charged, it
will get displayed on your screen. Unplug the
charger and switch on the JioPhone.
To Next Page
Loading...