① [REC] button and [REC] Indicator (Red)
[REC] button is used to make setting of recording standby and putting a mark.
Indicator turns red during recording and blinks during recording standby.
② [STOP] button
Stop operation of recording and playback.
③ [PLAY/PAUSE] button
Make operation of recording and playback, also use for a temporary stop and re-start operation.
④ [REW] button
Make selections of rewinding and files.
⑤ [FF] button
Make selections of fast forwarding and files.
⑥ RECLEVEL [+/-]
Adjust recording level.
⑦ VOLUME [+/-]
Adjust recording level.
⑧ INPUT [MIC][1][2] buttons and INPUT Indicator(Green, Yellow, Red)
Make selections of input source. The indicator of the selected input button turns green light on.
*Button operation in detail: see the main unit operation manual.
⑨ Remote commander jack
Plug the jack in to the remote commander's jack.
To Next Page
Loading...
Need help?
General
