JL Audio C1-650X User Manual

OWNER’S MANUAL
Thank you for choosing JL Audio loudspeakers for
your automotive sound system.
We strongly recommend that you have your new loudspeakers installed by
an authorized JL Audio dealer. Your authorized dealer has the training,
expertise and installation equipment to ensure
optimum performance of these loudspeakers in your vehicle.
If you decide to install the loudspeakers yourself, please read this manual
thoroughly to familiarize yourself with their installation
requirements and setup procedures.
Should you have any questions regarding the instructions in this manual,
please contact your authorized JL Audio dealer for assistance, or call the
JL Audio Technical Support Department at (954) 443-1100
during business hours (USA - Eastern Time Zone).
6.5-inch (165 mm) Coaxial Loudspeakers

JL Audio C1-650X Specifications

General

Speaker Type	Component
Speaker Size	6.5 inches
Design	2-way
Tweeter Design	Silk Dome
Power Handling (RMS)	60 watts
Nominal Impedance	4 ohms
Crossover Type	Passive
Power Handling (Peak)	120 watts

Summary

Coaxial Physical Dimensions

C1-650x Specifications

Getting Started

Steps to prepare for installation and initial power-up.

Speaker Placement Considerations

Advice on choosing optimal locations for speaker mounting.

High-Performance Loudspeaker Warning

Warning about potential hearing loss from high sound pressure levels.

Installation Overview

Speaker Wiring

Instructions and considerations for connecting speaker wires.

Speaker Installation in Factory Locations

Guidance on fitting speakers into existing vehicle mounting points.

Installation Warnings

Warnings related to checking clearances and tightening screws.

Warranty and Service

Service Information

Details on how to obtain service and warranty claims.

International Warranties

Information regarding warranty coverage outside the USA.