What to do if my paired Bluetooth device won't connect to JLab Speakers?
If your device requires a passkey, verify that you entered the correct one (0000). Also, try turning the JLab Bouncer off and then back on. If the issue persists, remove the Bouncer from the pairing list on your Bluetooth device and then pair them again.
What to do if there is no audio from a Bluetooth device on JLab Bouncer?
If you're not getting any sound from your Bluetooth device through the JLab Music Link Wireless Speaker, first ensure that the speaker isn't muted and the volume is turned up. Also, check that your Bluetooth device is playing audio and its volume is also up. If that doesn't work, your Bluetooth device may be out of range, so try moving it closer to the speaker. As a last resort, try turning the Music Link Wireless Speaker off and then back on again.
Why won't my paired Bluetooth device connect to JLab Bouncer?
If your paired Bluetooth device isn't connecting to the JLab Music Link Wireless Speaker, first ensure that you've entered the correct passkey if one is required. If that doesn't work, try turning the Music Link Wireless Speaker off and then back on. As a final step, remove the Music Link Wireless Speaker from the pairing list on your Bluetooth device, and then pair them again from scratch.
What to do if my JLab Music Link Wireless Speaker indicates a connection, but is not playing music?
If your JLab Music Link Wireless Speaker shows it's connected but no music is playing, try turning off or disabling Bluetooth on all other paired devices nearby, then reconnect the device you want to use. If that doesn't work, turn the Music Link Wireless Speaker off and back on.
What to do if there is no audio from the AUX source on JLab Speakers?
If you're not getting any audio from the AUX source on your JLab Music Link Wireless Speaker, ensure that the connected device is turned on and playing. Also, verify that your Music Link Wireless Speaker is set to Aux in mode. Finally, check that the 3.5mm plug is fully inserted into the Music Link Wireless Speaker.
What to do if JLab Bouncer are connected but not playing music?
First, turn off or disable Bluetooth on all other paired devices nearby and reconnect the device you want to hear. Next, ensure that the JLab Bouncer is not muted and that the volume is turned up. Finally, check that your Bluetooth device is playing audio and its volume is also up.
How to turn on JLab Bouncer?
Ensure that your system is connected to a working power outlet. After that, one click should turn on the speaker.
Why is there no audio from my Bluetooth device on JLab Bouncer Speakers?
Turn the JLab Bouncer off and then back on. Also, ensure that your connected device is on and playing audio.
Explains functions of Power/Mode, Call, and Volume control buttons.
Introduces the process and indicator light for Bluetooth pairing.
Detailed steps for first-time pairing and connecting to the speaker.
Covers shock prevention, water use, cleaning, ventilation, heat, and plug safety.
To Next Page
General
