EasyManua.ls Logo

JLG ES1932 User Manual

JLG ES1932
120 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Copyright ©
ANSI
AS/NZS MOL70 GB
Operation & Safety
Manual
Original Instructions -
Keep this manual with the machine at all times.
Model
ES1932, ES1932i
PVC 2304
31221541
April 10, 2023 - Rev A

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the JLG ES1932 and is the answer not in the manual?

JLG ES1932 Specifications

General IconGeneral
BrandJLG
ModelES1932
CategoryBoom Lifts
LanguageEnglish

Summary

Safety Alert Symbols and Signal Words

Danger Hazard Indicator

Indicates an imminently hazardous situation, serious injury or death.

Warning Hazard Indicator

Indicates a potentially hazardous situation, serious injury or death.

Caution Hazard Indicator

Indicates a potentially hazardous situation, minor or moderate injury.

Section 1 Safety Precautions

1.2 Pre-Operation Safety and Inspections

Details pre-operation requirements, training, workplace, and machine inspections.

1.3 Operation Safety and Hazards

Covers general operation, trip/fall, electrocution, tipping, and collision hazards.

1.5 Maintenance Safety Precautions

General safety precautions and hazards during maintenance.

Section 2 User Responsibilities, Machine Preparation, and Inspection

2.1 Personnel Training and Familiarization

Requirements for operator training, supervision, responsibilities, and familiarization.

2.2 Preparation, Inspection, and Maintenance Schedule

Schedule for preparation, inspections, and maintenance.

2.3 Pre-Start Inspection Procedures

Detailed checklist for pre-start inspection of the machine.

2.4 Walk-Around Inspection Procedures

Detailed checklist for walk-around inspection of the machine.

2.5 Function Check Procedures

Steps to perform functional checks of machine systems.

Section 3 Machine Controls, Indicators, and Operation

3.7 Ground Control Station Overview

Identifies components of the ground control station.

3.8 Platform Control Station Overview

Identifies components of the platform control station.

3.9 Platform Manual Descent

Procedure for manual platform descent in emergencies.

Section 4 Emergency Procedures

4.3 Emergency Operation Scenarios

Actions for various emergency situations.

4.4 Platform Manual Descent Procedure

Procedure for manual platform descent in emergencies.

Section 6 Machine Specifications and Operator Maintenance

6.3 Machine Specifications Overview

Key specifications of the machine.

6.6 Scissor Arm Safety Prop

Procedure for using the safety prop.

6.10 Diagnostic Trouble Codes (DTC)

Explains diagnostic trouble codes and troubleshooting.

Related product manuals