The TELIS 9000 is a universal input transmitter designed for precise measurement and control in industrial applications. It features quadruple galvanic isolation, 24-bit conversion for inputs, and 16-bit conversion for outputs, ensuring high accuracy and reliability. The device is guaranteed for 5 years, highlighting its robust construction and quality.
Function Description
The TELIS 9000 serves as a universal input transmitter capable of handling various sensor types and providing corresponding outputs. It supports both single and dual current passive mA inputs with a calculation mode, allowing for complex signal processing. The device offers extensive programming capabilities, accessible via a front-panel joystick or a PC using the IXLOG software.
Key functions include:
- Input Processing: Converts signals from a wide range of sensors into standardized outputs.
- Output Generation: Produces analog current (0-10mA, 0-20mA, 4-20mA) and voltage (0-10V, ±10V, 0-5V, 1-5V, 2-10V) outputs, as well as relay outputs (1RT or 1T).
- Communication: Features isolated USB on the front panel and isolated RS485 Modbus RTU for digital communication, configuration, and control.
- Display and Monitoring: Equipped with a backlit LCD screen (5 characters, 5 lines, blue color) for visualizing inputs, outputs, and alarm statuses. Devices without a display have a green LED indicator.
- Alarm Management: Supports up to four alarms with configurable thresholds, hysteresis, time delays, and relay assignments. Alarms can be acknowledged and their statuses stored.
- Simulation Function: Allows users to simulate input values to test analog output values and relay statuses without actual sensor input.
- Calculation Mode: For dual current inputs, it can perform calculations (+, -, x, /) on the input signals, with the result available on input 3.
- Segmentation: Offers linearization in up to 99 points for creating custom output functions based on input signal segmentation. It also supports PTC/NTC curve creation via IXLOG software.
- Filtering: Integrates measurements over a defined time to smooth out signal variations.
- Offset and Tare: Provides manual adjustment of input offset and a taring function for current, voltage, and potentiometer inputs.
- Cut-off: Defines a threshold below which the input is considered null, preventing display of very low or noisy signals.
- Absolute Value and Square Root: Can configure outputs to be a function of the absolute value of a bidirectional input or the square root of the input.
Important Technical Specifications
- Input Types:
- Current (continuous): Standard scales (0-1mA, 0-10mA, 0-20mA, 4-20mA, ±1mA, ±10mA, ±20mA); adjustable from -22 to 22mA. Input impedance: 5.6Ω.
- Voltage (continuous): Standard scales (0-100mV, 0-1V, 0-5V, 1-5V, 0-10V, 2-10V, ±100mV, ±1V, ±5V, ±10V, 0-50V, 0-100V, 0-200V, 0-500V, 0-1000V, ±50V, ±100V, ±200V, ±500V, ±1000V); adjustable from -110 to 110mV, from -2 to 11V, from -1000 to 1000V. Input impedance: >10MΩ (U<10V), 6MΩ (U±10V or >10V).
- Variable Resistance Thermometer (RTD): PT10, PT100, PT1000, Ni100, Ni1000 (2 or 3 wires); adjustable scales (CU50, CU53, CU100). Current input: <1mA (PT100, Ni100), <0.8mA (PT1000, Ni1000).
- Resistance (2 wires): Standard scales (200Ω, 1KΩ, 10KΩ, 50KΩ); adjustable scales (200Ω, 1KΩ, 10KΩ, 50KΩ programmable with IXLOG software). Current input: <1mA (R=200Ω, R=1kΩ), <0.2mA (R=10KΩ).
- Thermocouple: Standard scales (J, K, R, S, T, E, B, N, W3/D, W5/C, Mo, P); adjustable scales (J, K, R, S, T, E, B, N, W3/D, W5/C, Mo, P). Cold junction compensation: internal or external.
- Potentiometer: From 0-100Ω to 0-100KΩ.
- Sensor Supply: 2 or 3 wires sensor 24V - 32mA max (only in 1 channel input mode).
- Output Types:
- Current (1 & 2): Standard scales (0-10mA, 0-20mA, 4-20mA); adjustable from 0 to 20mA. Permissible impedance: <1KΩ.
- Voltage (1 & 2): Standard scales (0-10V, ±10V, 0-5V, 1-5V, 2-10V); adjustable from -10 to 10V (Output 1), from 0 to 10V (Output 2). Permissible impedance: >1KΩ.
- Relay: 1RT or 1T, 2A-250Vac.
- General Characteristics:
- Precision Class: 0.1
- Input A/D Conversion: 24 bits
- Output A/D Conversion: 16 bits
- Response Time: <80ms (process input, thermocouple, 2 wires resistor), <160ms (RTD potentiometer).
- Thermal Drift: <25ppm
- Residual Ripple: <20μA (current output), <10mV (voltage output).
- Maximum Consumption: <10VA
- Operating Temperature: -10°C to +60°C
- Storage Temperature: -25°C to +80°C
- Protection Factor: IP20 (Black self-extinguishing polyamide housing V0).
- Isolation:
- Supply/Input-Output(s)-Relay-RS485-USB: 4200Vrms, 50Hz, 1mn
- Input/Output 1/Output 2/Relay/RS485: 2500Vrms, 50Hz, 1mn
- USB/Input: 2500Vrms, 50Hz, 1mn
- USB/Output 1-relay: 2500Vrms, 50Hz, 1mn
- USB/RS485: 2500Vrms, 50Hz, 1mn
- Auxiliary Source: 22-240Vdc or 90-230Vac 50/60Hz.
Usage Features
- Universal Input: The TELIS 9000 is highly versatile, accepting signals from a wide array of sensors, making it suitable for diverse industrial applications.
- Hot-Swappable Design: The module can be plugged in and out of its baseline while powered, facilitating maintenance and system upgrades without interrupting operations.
- User-Friendly Interface: Programming can be done directly on the front panel using a 5-position joystick and LCD display, or via PC software (IXLOG) for more advanced configurations.
- Graphical Display: The LCD screen provides clear visualization of input values, programmed values, and alarm statuses, enhancing operational awareness.
- Memory Mini/Maxi: Stores the maximum and minimum measured values for each input channel, useful for monitoring process extremes.
- Customizable Display: Allows adjustment of resolution, decimal point, and contrast, and offers a "display off" option for power saving or specific operational needs.
- Modbus RTU Communication: Enables seamless integration into existing Modbus networks for remote monitoring, configuration, and control. The device acts as a slave, responding to queries from a master device (e.g., PLC).
- PC Programming (IXLOG Software): The IXLOG software provides an advanced, user-friendly human/machine interface for programming, backup, copy/paste configurations, device detection, and real-time measurement visualization.
- Safety Features: Includes programming lock to prevent unauthorized changes and sensor signal loss detection, which translates to display messages, analog output adjustments, digital output changes, and relay status updates.
Maintenance Features
- Easy Cleaning: The device can be cleaned by switching it off and using a cloth slightly moistened with distilled water.
- Modular Design: The hot-swappable module simplifies replacement and repair.
- Factory Repair: All repairs are exclusively carried out at JM Concept's premises to ensure quality and maintain the warranty.
- Protective Fuse Recommendation: An external time-delayed fuse (T 500mA 250V) with a high cut-off power is recommended to protect the external power supply, as the product itself is not equipped with one.
- Storage Conditions: Must be stored in its packaging in a room protected from dust, moisture, and mechanical vibration, within a temperature range of -25°C to +80°C.
- Installation Guidelines: Detailed instructions for mounting on a DIN rail and wiring are provided, including recommendations for wire section, stripping length, and tightening torque, to ensure proper and safe installation.
- Environmental Considerations: Designed for indoor use in an electrical box, within specified ambient temperatures (-10°C to +60°C), and capable of withstanding grid fluctuations of +/-10% on its voltage supply.
- Insulation Level: External circuits connected to inputs and outputs should have an insulation level of 2500Vrms to maintain the device's internal insulation.
Need help?
General
To Next Page
