Need help?Do you have a question about the JMA ECCO and is the answer not in the manual?
The ECCO key cutting machine is designed for safety and ease of use, requiring calibration.
Machine dimensions are 570x520x410mm, weight 18.5kg with packing. Check for transport damage.
The identification label provides serial number, manufacturer details, CE mark, and year of manufacture.
Identifies and illustrates the standard parts of a key, including head, neck, blade, and tip.
Details the main components of the ECCO machine, such as milling cutter, clamps, and tracer point.
Lists technical specifications including motor details, cutter size, speed, dimensions, and weight.
Procedures for aligning the machine components for accurate key cutting.
Aligns milling cutter and tracer point with key grooves using adjustment keys and specific screws.
Adjusts cutting depth by setting the tracer point to gently rub the milling cutter against adjustment keys.
Step-by-step guide for safely operating the machine to cut keys, including inserting original and blank keys.
Instructions for duplicating narrow bit keys using rods to ensure proper clamping and prevent clamp contact.
How to cut keys without shoulders by inserting wedges into the clamp slots to adjust key position.
Procedure for cutting cross-shaped keys, utilizing wedges and performing cuts in three stages.
Steps to safely remove and replace the milling cutter, involving guard removal and shaft nut adjustment.
Essential safety guidelines including unplugging the machine, working with dry hands, and using safety glasses.
To Next Page
General
