JNC SSF-1100 - Page 46

○3 CLICK ‘OK’.
○4 FORMAT IS COMPLETED.
☞ DO NOT TAKE THE SET AWAY DURING FORMATTING.
IT MAKE SERIOUS PROBLEM TO SET.
- IF FORMATTING IN FAT32, DO IT BY FAT AT THE PC AGAIN.
- AFTER REMOVING THE SET FROM PC IN FORMATTING WITH
FAT32, “SYSTEM ERROR PLEASE FORMAT” WILL BE NOTICED ON
THE SET. IF SO, PRESS “MENU” WITH LONG KEY AND THEN GO
INTO SYSTEM/FORMAT IN THE MENU AND TRY TO FORMAT
AGAIN.
45
This Manual: http://www.manuallib.com/file/2493888