JNGE Power JN-MPPT - Light and Time Control Settings

- 8 -
D. Button function
discharge
recover
can be set.
OVD
Over charge
Field lights up, battery over charge voltage can be set.
when the battery is over charge, the field flashes.
OVD-R
Over charge
recover
Field lights up, battery over charge recovery voltage
can be set.
Float
Floating
charge
Field lights up, battery floating charge voltage can be
set. The field flashes during floating charge.
BCV
Booster
charge
Field lights up, battery booster charge voltage can be
set. The field flashes during booster charge (improving
charge).
ECV
Equalizing
charge
Field lights up, battery equalizing charge voltage can be
set. The field flashes during equalizing charge.
Time
Time1 set
Field lights up, Time control 1 can be set (the first light
working- time). When set as 0, the controller is for
household use.
Time1
Time2 set
Field lights up, choosing street light mode, the time
control 2 can be set. (light off- time)
Time2
Time3 set
Field lights up, choosing street light mode, the time
control 3 can be set. (the second light working-time)
L-con-V
Light control
voltage set
Field lights up, when 1 occurs at the first place of the
display area, light control OPEN voltage (when lights
on) can be set. When finished, 2 occurs at the first place
of the display area, light control CLOSE voltage (when
lights off) can be set.
MPPT
MPPT charge
The field flashes during MPPT charge.
Error
error
When alarms, field lights up