To Next PageTo Next Page
Need help?Do you have a question about the jobmate 54-2891-8 and is the answer not in the manual?
General| Chuck Type | Keyless |
|---|---|
| Corded/Cordless | Corded |
| Variable Speed | Yes |
| No Load Speed | 0-2800 RPM |
| Chuck Size | 3/8 inch |
Provides essential safety precautions to avoid electrical hazards, fire, and personal injury during tool operation.
Outlines precautions for safe electrical usage, including polarized plugs and avoiding grounded surfaces.
Emphasizes reading the manual, wearing eye protection, and avoiding loose clothing or jewelry.
Safety guidelines for drilling, including securing the workpiece, avoiding foreign objects, and bit handling.
Precautions for storing and carrying batteries to prevent short circuits, fire, or injury from leakage.
Step-by-step guide for charging the battery pack using the provided charger and stand.
Instructions on how to remove a discharged battery and install a charged one into the drill.
Explains how to adjust the torque clutch for different screw sizes and material types.
Step-by-step instructions for securely inserting and tightening drill bits into the keyless chuck.
Techniques for drilling into various surfaces, including marking holes and securing the workpiece.
Detailed steps for drilling, including checking bit security, setting torque, and handling bit breakthrough.
