Need help?Do you have a question about the jobmate JMCMS18G and is the answer not in the manual?
Instructions for securely clamping and supporting workpieces during cuts.
Guidance on push/pull techniques and hand positioning.
Keeping hands away from the spinning blade and preventing contact.
Detailed steps for setting mitre angles and performing cuts.
Step-by-step process for making compound mitre cuts.
How to operate the switch trigger to turn the saw on and off.
Instructions for making cuts at a bevel angle.
Steps for performing crosscuts with the mitre saw.
Guide to performing cuts with both mitre and bevel angles.
To Next Page
General
