17
Design and Compliance Notes
Design Notice
The design and specifications are subject to change without prior notice for
product improvement. Consult with the sales agency or manufacturer for details.
Any updates to the manual will be uploaded to the service website, please check
for the latest version.
Unit Temperature Range
Cool 17-35°C (62-95°F)
Dry
13-35°C (55-95°F)
Mode Temperature Range
Energy Rating Information
The Energy Rating for this unit is based on an installation using an un-extended exhaust duct without window
slider adaptor or wall exhaust adaptor A (as shown in the Installation section of this manual). At the same time,
the unit must be operate on the COOL MODE and HIGH FAN SPEED by remote controller.
NOTE: To be in compliance EN 61000-3-11, the product MPPH-08CRN7-QB6 shall be connected only to a
supply of the system impedance: | Zsys|=0.451 ohms or less, the product MPPH-09CRN7-QB6G1 shall be
connected only to a supply of the system impedance: | Zsys|=0.437 ohms or less, Before connect the product
to public power network, please consult your local power supply authority to ensure the power network meet
above requirement.
To Next Page
Loading...
