Why is my Jocel JACP-010 not working?
Your Jocel Air Conditioner might not be working due to several reasons: it might not be connected to a functioning power outlet, the power light could be flashing indicating the drain pan needs emptying, or the timer function might be activated. Connect the unit to a functioning outlet and switch it on, empty the drain pan, or deactivate the timer function to resolve the issue.
What to do if the remote control of Jocel JACP-010 Air Conditioner does not function?
If the remote control for your Jocel Air Conditioner isn't working, it could be due to several reasons. Ensure that you are not too far from the unit, aim the remote control correctly at the control panel and that the batteries aren't drained. If the batteries are drained, replace them.
Why does Jocel JACP-010 not seem to perform well?
If your Jocel Air Conditioner isn't performing well, check if the unit is in direct sunlight (close the curtains), if windows or doors are open, or if there are many people or a heat source in the room (close doors and windows, consider an extra air conditioner). Also, ensure the filter is clean (clean or replace it) and that the air inlet or outlet isn't blocked (remove the blockage). Finally, check if the room temperature is lower than the selected temperature; if so, change the temperature selection to the lowest possible setting: 17ºC.
General| Cooling Capacity | 10000 BTU/h |
|---|---|
| Refrigerant | R290 |
| EER | 2.6 |
| Energy Class Cooling | A |
| Air Flow Rate | 380 m³/h |
| Noise Level | 65 dB |
| Timer | Yes |
| Remote Control | Yes |
| Display | LED |
| Functions | Cooling, Dehumidification |
Details electrical requirements and grounding for safe operation and shock hazard prevention.
Guidance on responsible disposal of the product to prevent environmental harm and promote reuse.
Applies to persons with reduced capabilities and requires supervision of children for safe use.
Identifies and labels all components visible on the front and back of the unit.
Lists the flexible exhaust hose, window exhaust adapter, and adjustable window kit.
Instructions for choosing a suitable placement for the unit, ensuring unobstructed airflow.
Steps to connect the exhaust hose to the unit and maintain its straightness for efficient venting.
Details on venting hot exhaust air through a wall, including required hole dimensions.
Procedure for fitting the window kit into various window types for proper exhaust sealing.
Explanation of the buttons and indicators on the unit's control panel for operation.
Detailed instructions for using Cooling, Dehumidifying, Fan, and Heating modes.
Important note on waiting 3 minutes before restarting the unit to prevent compressor damage.
Guide to using the remote for all unit functions, including mode, fan speed, and sleep.
Step-by-step instructions for emptying the internal water container when full.
How to connect a drain tube for continuous removal of condensate water.
Procedures for cleaning the unit's exterior and the air filters for optimal performance.
Instructions for preparing and storing the unit safely during off-season or extended periods.
Identifies common problems, their causes, and provides solutions for the air conditioner.
To Next Page