58
BEFORE USE
This Side by Side appliance is not intended to be used as a built-in appliance.
• Remove all of the packaging, including the foam backing at the bottom of the unit and the tape
that fixes the shelves and door bins inside.
• Place the Side by Side to a proper position, and adjust the feet to level. It is recommended to
wipe out your unit with a warm soapy cloth and dry it thoroughly before use.
• Place the Side by Side and adjust to level, clean it, let the Side by Side stand for above 4-6
hours, and then power the unit on. This helps make sure that the oil from the compressor has
settled properly, and will help your unit run normally.
STARTING
• Connect the power cord, and turn on the power switch.
• Upon startup for the first time, the screen will display respective set temperature values (the
temperature of the refrigerator section is set to 5°C, the temperature of the freezer is set to-
18°C).
• The default mode is energy saving upon startup: The screen displays for 20s and then goes off.
This mode to save energy and prolong the service life of LED lights.
CONTROL PANEL
FEATURE SELECTION
• Each press of the “Feature” button will cycle through the operating modes.
• Holiday Mode - the refrigerator will run at 6°c while the freezer will operate at -15°c.
• Super freezer mode – When the super freezer mode is selected, the compressor will operate
continuously to freeze foods faster, and keep them fresh. The super freezer mode will
automatically turn off either after 24h of operation, or when the freezer reaches -28°C.The super
freezer icon will turn off, and the freezer will continue to operate at the normal set temperature.
• Super fridge mode – When the super fridge mode is selected, the fridge compartment reaches
the set temperature in the shortest period, in order to keep the food as fresh as possible. under
this mode, the set temperature of the fridge compartment locks on 0°C.The program runs
150mins maximally then exits automatically, the super fridge icon goes out, which represent the
super fridge function is disable, the set temperature returns to the last one before the super fridge
mode operates.
To Next Page
Loading...
