What to do if the Joerns Lifting Systems actuator does not run but the power indicator lights up and relays click?
If the power indicator lights up, but the actuator doesn't run and you hear relay clicking, ensure the actuator plug is properly pushed into the control box. If that doesn't solve the issue, the actuator or the control box might be defective and need replacement.
Why Joerns HPL402 Hoyer actuator does not run on battery but relay clicks?
If the actuator does not run on battery power, but you can hear the relay clicking, the actuator plug might not be fully pushed into the control box. Ensure it is properly connected. If the issue persists, the actuator or control box may be defective and require replacement.
What to do if Joerns HPL402 Hoyer control box is completely dead on battery and no relay clicking is heard?
If the control box is completely dead and no relay clicking is heard, the battery may be completely flat. Try charging the battery. If charging doesn't resolve the issue, the battery might be defective and need to be replaced.
What to do if Joerns Lifting Systems power indicator lights up but actuator doesn't run and no relay noise is heard?
If the power indicator lights up but the actuator doesn't run and there's no relay noise, the control box or the handset might be defective. In this case, send the control box or handset for repair.
How to fix Joerns HPL402 Hoyer when the power indicator does not light up?
If the power indicator on your Joerns Lifting Systems does not light up, first connect the system to the mains. If it still doesn't light up, replace the fuse if the system is prepared for external fuse replacement, or send the system for repair. As a last resort, send the control box for repair.
What to do if Joerns HPL402 Hoyer Lifting Systems control box is okay apart from one direction on one channel?
If the control box is okay except for one direction on one channel, the handset or control box may be defective. In this situation, send the handset or control box for repair.
General| Brand | Joerns |
|---|---|
| Model | HPL402 Hoyer |
| Category | Lifting Systems |
| Language | English |
Steps for installing the power conversion kit onto Hoyer lifters.
Lists key features of the lifter's power unit, including battery and charging.
Addresses common power unit issues, their causes, and recommended actions.
Explains operation via the hand control and basic lifter movement.
Instructions for charging the battery and important care guidelines.
Guide to selecting the correct sling size based on patient weight.
Checklist for essential maintenance checks to ensure safe operation.
Details warranty coverage, parts, service, and exclusions for the lifter.
To Next Page
