MNP85ENV00 Rev.02 (2014-01-07) Page 3 of 20
TABLE OF CONTENTS:
1.
GENERAL DESCRIPTION 4
1.1 Banknote reader structure 4
1.2 Mechanical characteristics of the banknote reader 4
1.3 Dimensions of the banknote reader 4
1.4 Electronic characteristics of the banknote reader 5
2. BANKNOTE READER STATUS LEDS 5
3. USING DIP SWITCHES 6
3.1 Normal operation (communication with machine) 6
3.2 Reader behaviour when a jam is detected 7
3.3 Bill group acceptance 7
3.4 Bit time adjustments. 7
3.5 Testing and programming 7
3.6 Bill inhibition and software information 8
3.7 Sensor calibration 8
3.8 Front LED lighting control without MDB communication 9
3.9 Secure scrow mode 9
4. TECHNICAL INFORMATION 9
4.1 Machine programming options 9
4.2 BT11 MDB communications connection 10
5. MAINTENANCE PROCEDURES 10
5.1 Sensor calibration 10
5.2 Programming banknote inhibition 11
5.3 Updating the program 11
5.4 Updating patterns 11
5.5 Cleaning the banknote reader 11
5.6 Removing banknotes from the stacker 11
6. TROUBLESHOOTING 12
7. APPENDIX 13
8. NOTES 19
To Next Page