Thank you for purchasing this Alex cot. Please read the instructions and warnings carefully before use
to ensure safe and satisfactory operation of this product.
Your child’s safety is your responsibility. If you have a query with this product or require replacement
parts, please contact your nearest John Lewis department store.
Lay out the parts on a soft level surface and compare to the part/fixings checklist on page 2. Do not
discard any packaging until you are sure that you have all the parts.
Keep children clear during assembly as pack contains small parts which may present a choking hazard.
Recommended mattress: 60 x 120cm
This product complies with BS EN 716 - 1: 2008 + A1 2013
You will need:
1 x 6mm Allen Key (supplied)
Flat-headed screwdriver
Fixings
Parts
Base x 1
C
Side x 2
B
Ends x 2
A
65mm bolt x 4
1
45mm bolt x 8 13mm barrel nut x 4
2 3
2
To Next Page
Loading...
