John Lewis Aston - Getting Started: Tuning Stations; DAB Station Tuning Guide; FM Station Tuning Guide

8
Switch on/off
1. Press and hold the ‘ ’ button
on the top of the radio to switch
on.
2. Press and release the
‘ ’ button to switch off. The radio
will go into standby mode and the
time and date will be displayed.
DAB
1. Press and release the ‘DAB/
FM’ button until you are in DAB
mode.
2. Press and release the ‘Scan’
button to scan for DAB stations.
3. Press and release the ‘Station
+’ and ‘- Station’ buttons on the
radio to move through the station
list.
4. Press and release the ‘Select’
button on the top of the radio
when the station you would
like to listen to is displayed.
Alternatively, wait a few seconds
and your radio will automatically
tune to the displayed station.
5. Adjust the volume using the left
hand rotary control.
FM
1. Press and release the ‘DAB/FM’
button until you are in FM mode.
2. Press and release the ‘Scan’
button to scan for FM stations,
your radio will stop at the next
available station.
3. Press and release the ‘Station +’
and‘-Station’buttonstonetune
each frequency, if required.
4. The RDS information for
each station will be displayed, if
available.
5. Adjust the volume using the left
hand rotary control.
5 Step guide to getting started