John Lewis DAY & NIGHT ROLLER BLIND

Need help?

Do you have a question about the John Lewis DAY & NIGHT ROLLER BLIND and is the answer not in the manual?

Summary

Product Introduction and Setup

Video Guidance

Access online videos for roller blind installation and fitting guidance.

Required Tools

List of tools necessary for the blind assembly and installation process.

Assembly Workforce

Indicates the number of persons needed for the assembly of the blind.

Assembly Duration

Estimated time required for completing the roller blind assembly.

Safety Warnings

General and Child Safety Warnings

Crucial safety advice covering choking hazards, strangulation risks, and cord management.

Installation Recommendations

Recommended Installation Steps

Follow instructions, check parts, tighten fittings, and use safety devices for proper installation.

Installation Prohibitions

Prohibited Installation Actions

Avoid over-tightening screws and using power tools to prevent damage or failure.

Parts List

Component Identification

Details of all parts included in the blind kit with codes, quantities, and dimensions.

Blind Positioning

Mounting Location Options

Guidance on deciding whether to mount the blind inside or outside the window recess.

Measuring for Fit

Instructions for accurately measuring the window space for inside and outside recess fits.

Trimming the Blind

Fabric Marking

Steps to mark the fabric accurately for cutting to the desired size.

Fabric Cutting

Procedure for cutting the fabric to the marked lines for trimming.

Bar Trimming

Instructions for cutting the top and bottom bars to ensure proper fabric fit.

Product Assembly

Bracket Installation

Steps for drilling holes and fastening mounting brackets to the wall or ceiling.

Blind Mounting

Guide on how to install the main blind unit onto the previously fitted brackets.

Blind Removal

Instructions on how to detach the blind from its mounting brackets.

Child Safety Device Installation

Procedure for fitting the safety device to secure the blind's control chain.

Wall Mounting and Fixings Guide

Key Information and Warnings

Important notes on using correct fixings for different wall types and ensuring safety device fitment.

Wall Plug Types

Details on various types of wall plugs suitable for different wall materials like brick or plasterboard.

Product Information

Caring for Your Product

Maintenance advice for cleaning the blind fabric and checking components for safety.

This document is an instruction manual for a Day & Night Roller Blind, manufactured for John Lewis & Partners. It provides comprehensive guidance on installation, usage, and maintenance, emphasizing safety aspects throughout.

Function Description:

The Day & Night Roller Blind is a window covering designed to offer versatile light control and privacy. It features two layers of fabric, typically alternating between opaque and sheer strips, which can be adjusted to align in various configurations. This allows users to switch between full privacy, filtered light, or an open view, adapting to different times of day and personal preferences. The blind operates via a beaded chain mechanism, enabling smooth raising and lowering of the fabric. The design aims to be both functional and aesthetically pleasing, suitable for various interior settings. The manual highlights the importance of correct installation to ensure safe and satisfactory operation, particularly concerning child safety features.

Important Technical Specifications:

The manual details the components included in the package, along with their dimensions and quantities.

Headrail (x1): The main structural component from which the fabric hangs.
Fabric (x1): The dual-layer material that provides light control and privacy.
Bottom Bar (x1): A weighted bar at the bottom of the fabric to ensure it hangs straight and moves smoothly.
Metal fixing brackets:
- 3 pieces for product width > 150cm (40x24x9mm)
- 2 pieces for product width ≤ 150cm (40x24x9mm)
Screws:
- 3 pieces for product width > 150cm (Ø4x30mm)
- 2 pieces for product width ≤ 150cm (Ø4x30mm)
Screw (safety clip) (x2): Used for securing the child safety device (Ø4x20mm).
Wall Plugs:
- 3 pieces for product width > 150cm (Ø6x30mm)
- 2 pieces for product width ≤ 150cm (Ø6x30mm)
Safety clip (x1): A crucial component for child safety, designed to keep the operating chain taut and out of reach (50x16x18mm).

The manual specifies that the headrail should not be installed less than 1.5m from the floor for safety reasons. For inside recess mounting, the recess needs to be at least 7.5cm deep to accommodate the blind mechanism. When trimming the top bar for inside recess fitting, 28mm should be subtracted, and for the bottom bar, 32mm should be subtracted. An important note for cutting the top bar is to ensure a 4mm edge of the headrail remains uncovered by fabric to prevent rubbing against the mechanism.

Usage Features:

The blind offers flexibility in mounting options:

Outside recess mount: The blind overlaps the window opening, ideally by at least 5cm on both sides, ensuring full coverage and light blockage.
Inside recess mount: The blind fits within the window frame, providing a neat, integrated look. This option may require trimming the blind to fit the exact dimensions of the recess. The manual provides detailed instructions for measuring both inside and outside recess installations, recommending taking measurements at different points and using the smallest to ensure accuracy. For outside recess fitting, it suggests leaving about 10cm above the window frame or recess.

A key usage feature is the child safety device, which must be installed to keep the beaded chain under constant tension and out of reach of young children, preventing strangulation hazards. The device should be positioned as far as possible from the control mechanism. The manual includes a QR code and a link to online video instructions for assembly, making the process easier for users.

Maintenance Features:

The Day & Night Roller Blind is designed for low maintenance.

Cleaning: The fabric can be dusted using a dry cloth. For cleaning, a barely damp cloth can be used.
Regular Checks: The product is maintenance-free, but regular checks are recommended to ensure that no components have been damaged. This helps prevent operating difficulties and safety risks.
Fabric Appearance: Upon unpacking, users might notice slight waves in the fabric due to packaging. These are expected to disappear after a few days once the blind is hung. Adding the bottom bar to the hem is suggested to aid this process.

The manual also provides a comprehensive guide to wall mounting and fixings, explaining different types of wall plugs suitable for various wall materials (brick, breezeblock, concrete, stone, wood, plasterboard, hollow wooden doors). This ensures that users can select the appropriate fixings for secure installation, contributing to the longevity and safe operation of the blind. It warns against over-tightening screws or bolts and using power tools for construction to prevent damage.