John Lewis Grace Bed - Step Three: Inserting Slats; Step Four: Completion

2 Lines
Normal slats
2 Lines
Normal slat
2 Lines
Wide slats
2 Lines
Wide slats
2 Lines
Normal slats
2 Lines
Normal slats
4 Lines
Wide slats
ZONE 2
ZONE 1
ZONE 5
ZONE 7
ZONE 6
ZONE 4
ZONE 3
Diagram 1
With the curved side facing upwards, insert slats into a centre cap then into side caps on either end(x32).
(Please note the Wide Slats (5) must be inserted with the Wide Side Caps (C)). Repeat this process for all
slats.
Note: Please see the Diagram 1 below to arrange the slat with the correct system.
Step Three
4/5
Bed is ready to use.
Step Four
4.
5.
B
C.
Side Caps x 16
.
Wide Side Caps
x 16
Wide Slats x 16
Slats x 16
(x8)
x32
B
C
4
5
(x8)
C
C
B
4
5
B