Fridge freezer user guide
18
1 Insert the bottom hole of fridge door straight into the
bottom hinge pin.
2 Align the top of door and ensure it is secure against the
cabinet. Insert the back of hinge into the groove first,
Fridge freezer levelling and door
alignment
The fridge freezer must be level in order to maintain optimal
performance and visual presentation.
If the floor underneath is uneven, the fridge freezer doors will
look unbalance.
Levelling the fridge freezer
2 Close the doors and put a flat-blade screwdriver into
groove of the left wheel (bottom of door).
Replacing the fridge door
then insert front mounting to top of door. Check carefully
it is well fastened.
3 Install the fastener (turn in a clockwise direction) and
connect the earth and harness wires. Fit the top hinge
cover and secure with the retaining screws.
3 Turn the wheel clockwise to raise the level or anti-clockwise
to lower the level.
4 After installation and / or levelling, ensure base panel fits in
place and screw is fastended.
1 Remove the three retaining screws (turn in an
anticlockwise direction) and remove the base panel.
To Next Page
Loading...
