What to do if John Lewis JLBIDW1318 Dishwasher won't drain water?
If your John Lewis Dishwasher isn't draining water, consider the following: * Check the sink spigot to ensure it is not clogged. * Inspect the filter in the outlet hose for any blockages. * Examine the interior filter system to confirm it is free of debris. * Make sure the drain hose is free from kinks or bends.
What to do if I cannot activate my John Lewis JLBIDW1318?
If you are unable to activate your John Lewis Dishwasher: * Ensure the mains plug is correctly connected to the mains socket. * Check the fuse box for any damaged fuses.
Why is my John Lewis Dishwasher not filling with water?
If your John Lewis Dishwasher isn't filling with water, several factors could be the cause: * Ensure the water tap is fully open. * Check that the water supply pressure isn't too low. Contact your local water authority for information on water pressure. * Verify the water tap isn't clogged. * Inspect the filter in the inlet hose for clogs. * Confirm the inlet hose has no kinks or bends restricting water flow.
What to do if John Lewis JLBIDW1318 programme does not start?
If your John Lewis Dishwasher programme isn't starting, check the following: * Ensure the appliance door is fully closed. * If the delay start is set, either cancel it or wait for the countdown to finish. * The appliance may have started the procedure to recharge the resin inside the water softener which takes approximately 5 minutes.
Why John Lewis dishwasher trips the circuit-breaker?
Your John Lewis Dishwasher might be tripping the circuit-breaker due to: * Insufficient amperage to supply all appliances in use simultaneously. Check the socket amperage and meter capacity, or turn off another appliance. * An internal electrical fault. Contact an Authorised Service Centre.
Why my John Lewis JLBIDW1318 programme lasts too long?
If your John Lewis Dishwasher programme is running longer than expected, check if the delayed start option is activated. If it is, cancel the delay setting or wait for the countdown to finish.
How to fix small leak from John Lewis JLBIDW1318 door?
If you notice a small leak from your John Lewis Dishwasher door: * Ensure the appliance is level by adjusting the feet. * Adjust the rear foot if the door isn't centered on the tub.
Why John Lewis Dishwasher door is difficult to close?
If you're having trouble closing the door of your John Lewis Dishwasher: * Make sure the appliance is level by adjusting its feet. * Check that no tableware is protruding from the baskets.
Why John Lewis JLBIDW1318 Dishwasher appliance stops and starts more times during operation?
The John Lewis Dishwasher stopping and starting during operation is normal. This provides optimal cleaning results and energy savings.
What causes rattling/knocking sounds from inside John Lewis Dishwasher?
Rattling or knocking sounds from inside your John Lewis Dishwasher could be due to: * Improperly arranged tableware in the baskets. Refer to "Loading cutlery and dishes". * Spray arms being unable to rotate freely.
General| Type | Freestanding |
|---|---|
| Energy Rating | E |
| Number of Place Settings | 13 |
| Wash Programs | 6 |
| Dimensions (H x W x D) | 85 x 60 x 60cm |
| Delay Start | Yes |
| Half Load Option | Yes |
Safety guidelines for children and vulnerable individuals using the appliance.
General safety precautions and intended use of the appliance.
Safe installation and electrical connection precautions.
Safe water connection and operational guidelines.
Safety warnings and instructions for disposing of the appliance.
An overview of the dishwasher's components and parts.
Explanation of buttons and indicators on the control panel.
Description of indicator lights and their meanings.
Details of available wash programmes, phases, and options.
Table showing water, energy, and duration for each programme.
Contact information for obtaining test performance data.
How to navigate between programme selection and user modes.
Explanation and adjustment of the water softener.
Settings for rinse aid alerts and programme end signals.
Activating programme end signal and AirDry function.
Instructions to disable the AirDry function.
Details and activation of the Extra dry option.
Initial setup steps and filling the salt container.
Instructions on how to correctly fill the rinse aid dispenser.
Daily operation guide and loading dishes/cutlery.
Specific advice for loading items into the lower basket.
Loading cutlery and items in the upper basket.
How to adjust the height of the upper basket.
Moving the upper basket and using detergent.
Starting programmes, auto-off, and door operations.
Cancelling programmes, delay starts, and countdowns.
General tips, using salt, rinse aid, and detergent.
Switching cleaning agents and loading baskets.
Checks before starting and unloading the dishwasher.
Detailed steps for cleaning the dishwasher's filter system.
Cleaning interior, spray arms, and exterior of the appliance.
Common problems, alarm codes, and their solutions.
Solutions for issues related to washing and drying performance.
Troubleshooting poor drying, water spots, odours, and limescale.
Addressing detergent residues, foam, and rust issues.
Causes and solutions for damage to tableware.
Specifications and data related to the dishwasher's performance and dimensions.
Installation warnings, unpacking, and levelling the appliance.
How to secure the appliance to surrounding kitchen units.
Connecting the water supply and drain hoses.
Electrical safety precautions and plug specifications.
Information on warranty, contacting support, and troubleshooting.
List of John Lewis shop contact details.
Information on recycling and responsible disposal of the appliance.
To Next Page
