What to do if the John Lewis JLDWS 907 Dishwasher programme fails to start?
If your John Lewis Dishwasher programme won't start, verify that the dishwasher is properly connected to the electrical power supply and that there is no power failure. Also, ensure the water tap is fully open and the dishwasher door is completely closed.
Why does water remain inside my John Lewis JLDWS 907 Dishwasher?
If water remains inside your John Lewis Dishwasher, inspect the drain hose to ensure it is not kinked. Also, check that the drain siphon is not obstructed and that the dishwasher filters are not clogged.
Why are the dishes not being cleaned properly in my John Lewis JLDWS 907 Dishwasher?
If your John Lewis Dishwasher isn't cleaning dishes well, several factors could be at play. Ensure you're using the correct amount of detergent and that the special container has regenerating salt. Check that you are loading dishes correctly and that the selected wash programme is appropriate for the dish types and level of soiling. Also, make sure all filters are clean and properly positioned, the spray arm nozzles aren't blocked, and nothing is obstructing the spray arms' rotation.
How to fix dishes that fail to dry or remain dull in John Lewis JLDWS 907?
If dishes in your John Lewis Dishwasher are not drying properly or appear dull, first check that the special container has rinse aid. Next, verify that the rinse aid dispenser setting is correct. Finally, consider whether the detergent is of good quality and hasn't lost its effectiveness due to improper storage.
Why are there visible traces of rust inside the tank of my John Lewis JLDWS 907 Dishwasher?
If you notice rust traces inside the tank of your John Lewis Dishwasher, remember that the tank is made of steel, so rust is typically due to external elements like fragments from water pipes, pots, or cutlery. Special products are available to remove these marks. Also, check that you're using the correct amount of detergent, as some can be more corrosive than others. Finally, ensure the salt container cap is securely closed and the water softening setting is correct.
General| Type | Freestanding |
|---|---|
| Noise Level | 49 dB |
| Number of Programmes | 6 |
| Quick Wash | Yes |
| Delay Timer | Yes |
| Width | 60 cm |
| Depth | 60cm |
| Delay Start | Yes |
| Half Load | Yes |
| Programs | Eco, Intensive, Normal, Pre-wash |
Safety guidelines for installing the dishwasher, covering handling, checks, and electrical/plumbing requirements.
Explanation of the various indicator lights on the control panel and their meanings.
How to use the Multi tab option for combined detergents and its effects on salt/rinse aid.
Instructions for setting a delayed start for the washing programme to suit user convenience.
Procedure for cancelling the currently running washing programme and restarting it.
Explanation of the water softener system and how to adjust its level based on water hardness.
Best practices for loading cutlery and dishes into the dishwasher for effective cleaning.
Instructions for loading the lower basket, suitable for tougher items and larger utensils.
Instructions for loading the upper basket with small/medium items and adjusting supports.
Steps for opening the lid and filling the detergent dispenser with the correct amount.
Steps to clean the water intake filter to ensure proper water supply and prevent blockages.
Instructions for cleaning the spray arms to maintain optimal water distribution and cleaning performance.
Troubleshooting steps for the anti-flooding system activation and associated error code.
Guidance for resolving the safety level sensor trip and error code E2.
Steps to address issues with water heating or incorrect heating parameters (E3).
Diagnosing and resolving water temperature monitoring errors (E4).
Troubleshooting water intake issues and error code E5.
Addressing problems with water pump-out and error code E6.
Resolving turbine flow regulator issues and error code E7.
Troubleshooting alternate washing system errors (E8).
Resolving water intake system errors and error code E9.
Instructions for installing the dishwasher under a kitchen worktop or sink unit.
Detailed guide for connecting the dishwasher to the cold or hot water supply.
Guidelines for safe electrical connection and how to replace the fuse in the plug.
Information on obtaining genuine spare parts and the importance of authorised service for repairs.
To Next Page
