22
Extraordinary maintenance
The oven may require extraordinary
maintenance or replacement of parts subject
to wear such as seals, bulbs, and so on. The
following instructions describe how to carry
out these minor maintenance operations.
Replacement of light bulb
Main oven - Auxiliary oven
If a light bulb needs to be replaced because it
is worn or burnt out, remove the guide
frames; see “Removing the guide frames”.
1 Remove the bulb cover using a tool (e.g. a
screwdriver).
2 Remove the bulb by unscrewing in the
indicated direction.
3 Replace the bulb with one of the same
type (25W).
4 Refit the bulb cover.
Warning! Before any
intervention, disconnect the
power supply of the device.
Warning! For your safety, you
are advised to wear protective
gloves while performing any
cleaning or extraordinary
maintenance.
Caution! Only use oven bulbs
(T300 °C).
To Next Page
Loading...
