John Lewis Retro - Scanning for DAB stations; Storing a DAB station preset

2.Press and release the 'Menu'
button, 'Menu tune' will Ье
displayed.
3. Use the 'Vol +' and 'Vol -' to
scroll through the stations.
4. When the station that you
would like to listen to is displayed
press
the 'Select' button. There
will Ье а short delay whilst your
DAB radio tunes to your selected
station.
ng for DAB
With DAB radio, additional
stations
and services regularly
become availaЫe so it's а good
idea to carry out а scan every
now and then to make sure that
you have the most up to date
station listing stored within the
memory of your radio. lf you have
moved
your radio to another
location, e.g. if you go on holiday,
then it's also а good idea to
carry out а scan.
l.lf you are not already in DAB
mode, press the 'Mode' button to
go to DAB mode.
2. Press and hold the 'Mode'
button for more than 1 second
to begin а full scan for stations.
The display will change to
'Auto Scan, Full Auto Scan' and
а progress bar will show the
progress of the scan and the
number of stations found during
8
the scan will also Ье displayed.
When the scan is complete your
radio will select the first availaЫe
station and begin to play. The
number of stations found during
the scan will Ье displayed. А
station scan takes approximately
one to three minutes.
Note: See page 7 for how to
change DAB stations after а scan.
Stc. .1g d. uA St..at.IOrt
Your radio can store up to
1 О DAB stations in its preset
memories for instant access to
your favourites stations.
Note: When you store DAB
radio station presets, these do
not overwrite your FM station
presets.
1. Tune your radio to the station
that you wish to preset (see
changing DAB stations, page 7).
2. Press the 'Preset' button.
'Preset 1' is displayed and 'ЕМ РТУ'
if no previous station has been
stored.
3. Use the 'Vol +' and 'Vol -'
buttons to move to the Preset
location that you would like to
store the radio station to .