Table 8: FX-PCX2721 UI Inputs and jumper labels
Universal Input label Jumper label on circuit board
IN4 J4
IN5 J5
IN6 J6
IN7 J7
IN8 J8
Commissioning
You commission controllers with Controller Configuration Tool (CCT) software, either via a Bluetooth
Wireless Commissioning Converter, a ZigBee® wireless dongle, or in BACnet Router mode when
connected to Supervisory Controller. Refer to the Controller Tool Help (LIT-12011147) for detailed
information on commissioning controllers.
Note: The MAP Gateway serves as a replacement for the BTCVT, which is no longer available
for purchase, but continues to be supported.
23FX-PCX2721 Expansion Input/Output Module Installation Instructions
To Next Page
Loading...
Need help?
General
