Table 27: Modbus training tool ordering information
Course number Course title and description
C-10077-EN
VGE Tool Software Training (North America)
The VGE tool is required to generate custom Modbus mapping tables.
PTK-CONT-26
VGE Tool Software Training (Europe and Asia)
The VGE tool is required to generate custom Modbus mapping tables.
Note: Modbus Integrations require one or more vendor Modbus definition (VMD) tables for specific third-party
equipment. You can purchase tables from your regional System Integration Services (SIS) office, or you can create
the tables with the VMD Generator Express (VGE) tool. To obtain a license, attend the training listed in this table.
Technical specifications
Table 28: NAE55xx-3 (UL 916, Energy Management) and NAE5510-3U (UL 864, Smoke Control) technical
specifications
Power Requirement
Dedicated nominal 24 VAC, Class 2 power supply (North America), SELV power supply
(Europe), at 50/60 Hz (20 VAC minimum to 30 VAC maximum)
Power Consumption 50 VA maximum
Ambient Operating Conditions 0°C to 50°C (32°F to 122°F); 10% to 90% RH, 30°C (86°F) maximum dew point
Ambient Storage Conditions -40°C to 70°C (-40°F to 158°F); 5% to 95% RH, 30°C (86°F) maximum dew point
Data Protection Battery
Supports data protection on power failure. Rechargeable gel cell battery: 12 V, 1.2 Ah,
with a typical life of 3 to 5 years at 21°C (70°F); Product Code Number: MS-BAT1010-0
Clock Battery
Maintains real-time clock through a power failure. Onboard cell; typical life 10 years at
21°C (70°F)
Processor 1.46 GHz Intel
®
Atom
®
Bay Trail E3815 processor for MS-NAE55xx-3 models
Memory
16 GB flash nonvolatile memory for operating system, configuration data, and
operations data storage and backup for MS-NAE55xx-3 models.
2 GB DDR3 SDRAM for operations data dynamic memory for all models
Operating System
NAE5510-3U (UL 864): Johnson Controls OEM Version of Microsoft® Windows®
Embedded Standard 7 with SP1 (WES7)
NAE55xx-3: (UL 916): Wind River
®
Linux LTS 17 (LTS=long-term support)
Network and Serial Interfaces
• One Ethernet port; 10/100/1,000 Mbps; 8-pin RJ-45 connector
• Two optically isolated RS-485 ports; 9.6k, 19.2k, 38.4k, or 76.8k baud; pluggable and
keyed 4 position terminal blocks (RS-485 terminal blocks available on NAE55 models
only)
• Two RS-232-C serial ports, with standard 9-pin sub-D connectors, that support all
standard baud rates
• Two USB 2.0 serial ports; standard USB connectors support an optional, user-
supplied external modem (no longer supported at Release 10.0 or later)
• One LonWorks port; FTT10 78 Kbps; pluggable, keyed 3-position terminal block
(LonWorks port available on NAE552x-x models only)
Housing
Plastic housing with internal metal shield
Plastic material: ABS + polycarbonate; Protection: IP20 (IEC 60529)
Mounting On a flat surface with screws on four mounting feet or on a dual 35 mm DIN rail
Dimensions
(Height x Width x Depth)
226 mm x 332 mm x 96.5 mm (8.9 in. x 13.1 in. x 3.8 in.) including mounting feet
Minimum space for mounting: 303 mm x 408 mm x 148 mm (12.0 in. x 16.1 in. x 5.8 in.)
Shipping Weight 2.9 kg (6.4 lb)
NAE55 Installation Guide22
To Next Page
Loading...
