Johnson Controls YORK RSR-1600V - MECHANICAL SPECIFICATIONS - PORTABLE RECOVERY PAK; Safeties

JOHNSON CONTROLS
11
SECTION 1 - INTRODUCTION
FORM 50.40-OM1 (713)
ISSUE DATE: 07/17/2013
1
The condenser is permanently mounted with refriger-
rant lines piped to the system. 3/4-inch hose bib con-
nections are pro vided for field connection to the water
supply.
Oil Separator and Heater
Oil separator includes a drain valve and 25 watt heater.
Controls
An on/off switch; electrical cord and plug are provided.
Safeties
Unit safeties include high pressure cutoff (adjustable),
and vacuum cutoff (adjustable). With a YORK refrig-
erant Easy Tank™, integral safeties include heater cut-
off (low pressure tanks only) pressure relief valve and
a liquid level switch. The pressure relief valves meet
ASME specifications.
Tanks
Nine standard EasyTank™ receivers are available,
from 191 to 4895 pound capacities, plus custom de-
signed receivers from 50 pound capacity and up.
Features
The unit has a solid frame construction. The unit is
equip ped with four heavy duty wheels for mobility.
The size and shipping weights are provided in Table 3
on page 11.
MECHANICAL SPECIFICATIONS – PORTABLE
RECOVERY PAK™
Valves and Hoses
The unit includes one input/one output refrigerant
valves, and two refrigerant hoses, 8’ long.
Filter
It includes replaceable, catch-all type filters with
singlecore, 48 cubic inches (786 ccm).
Refrigerant Compressor (High Pressure
Units)
The high pressure units for refrigerants CFC-12,
HCFC-22, CFC-500, CFC-502 and HFC-134a feature.a
reciprocating compressor that is capable of pulling a
vacuum to a level which is in accordance with EPA
regulations. (See Table 7 on page 17.)
Refrigerant Vacuum Pump
The low pressure units for refrigerants CFC-11,
HFC-123 and CFC-114 utilize a vacuum pump to
achieve the vacuum levels required by the EPA.
The term compressor will be used synonymously with
vacuum pump throughout this document except where
specific references are necessary.
Condenser
The water-cooled condenser is a tube-in-tube design.
TABLE 3 - RECOVERY PAK SPECIFICATIONS (STANDARD AND METRIC)
DESCRIPTION
MODEL
RP-1000V RP-114V RP-2200 RP-4400
Refrigerant
CFC-11
CF-114
CFC-12, 500 & 502 CFC-12, 500 & 502
HCFC-123
HCFC-22 HCFC-22
HFC-134a HFC-134a
Working
Pressure
PSIG 50 50 300 300
kPA 345 345 2069 2069
Power
HP 1 2 1-1/2 10
KW 0.75 1.5 1.1 7.5
Standard
Voltages
115V-1-60 115V-1-60 115V-1-60
460V-3-60208V-1-60 208V-1-60 208V-1-60
230V-1-60 230V-1-60 230V-1-60
Plugs Included Yes Yes Yes 4 Prong
Weight
Lbs 225 225 150 850
Kg 102 102 68 385
L x W x H
Inches 24 x 24 x 27 24 x 24 x 27 24 x 24 x 28 57 x 29 x 66
mm 610 x 610 x 686 610 x 610 x 686 610 x 610 x 711 1448 x 737 x 1676
Wheels Included Yes Yes Yes Yes