JOHNSON CONTROLS
12
FORM 50.40-OM1 (713)
ISSUE DATE: 07/17/2013
SECTION 1 - INTRODUCTION
Gauges
Unit mounted gauges allow the monitoring of the
suction and discharge pressure of the RSR system.
MECHANICAL SPECIFICATIONS – EASY
TANK™
Safeties
Low-pressure tanks use heater cutoff, pressure relief
valve and refrigerant level safeties. High-pressure
tanks use relief valves and liquid level safeties*.
*Float switch shuts off recovery unit when tank be-
comes 80% full of liquid refrigerant.
Rating
The tanks are ASME certified. All tanks contain inlet
and outlet valves and connections (See Table 4 on page
12).
MODEL REFRIGERANT
REFRIGERANT STORAGE
CAPACITY:
80% FULL AT 90°F (32°C)
DIAMETER X LENGTH
APPROXIMATE
SHIPING WEIGHT
LBS. KG INCHES MM LBS. KG
RT-191
RT-300
RT-600
RT-1100
RT-1600
RT-2212
HCFC-22 191 86.7 14-3/4 x 49 375 x 1245 68 31
CFC-11 & 114, HFC-123 600 272 20 x 52 508 x 1321 210 95
CFC-11 & 114, HCFC-123 1053 478 24 x 61 609 x 550 410 186
CFC-11 & 114, HCFC-123 1500 680 24 x 84 609 x 2134 460 209
CFC-12 1240 563 24 x 84 609 x 2134 1000 454
HCFC-22 1126 510 24 x 84 609 x 2134 1000 454
CFC-500 970 440 24 x 84 609 x 2134 1000 454
CFC-502 1170 530 24 x 84 609 x 2134 1000 454
HFC-134a 1140 517 24 x 84 609 x 2134 1000 454
RT-2222
CFC-12 2166 982 30 x 93-1/4 702 x 2368 1300 590
HCFC-22 1966 906 30 x 93-1/4 702 x 2368 1300 590
CFC-500 1937 879 30 x 93-1/4 702 x 2368 1300 590
CFC-502 2044 928 30 x 93-1/4 702 x 2368 1300 590
HFC-134a 1992 904 30 x 93-1/4 702 x 2368 1300 590
RT-4436
CFC-12 3976 1804 36 x 119 914 x 3022 2700 1225
HCFC-22 3612 1639 36 x 119 914 x 3022 2700 1225
CFC-500 3503 1590 36 x 119 914 x 3022 2700 1225
CFC-502 3752 1702 36 x 119 914 x 3022 2700 1225
HFC-134a 3652 1748 36 x 119 914 x 3022 2700 1225
RT-4445
CFC-12 4993 2265 42 x 112 1067 x 2845 3620 1642
HCFC-22 4535 2057 42 x 112 1067 x 2845 3620 1642
CFC-500 4399 1995 42 x 112 1067 x 2845 3620 1642
CFC-502 4712 2137 42 x 112 1067 x 2845 3620 1642
HFC-134a 4591 2082 42 x 112 1067 x 2845 3620 1642
Gauges
Sight glasses and pressure gauges are included.
Wheels
Standard wheels are included for tanks under 3000
pounds (1361 kg); custom wheels available for larger
sizes.
Custom Tanks
Custom-made tanks are also available from 50 pounds
(22.7 kg) stor age capacity to as large as required for
both high and low pressure refrigerants. Custom com-
ponents, controls, safe ties, and wheels are available.
Optional Clean Out Port
An ASME coded access port may be added as an op-
tion. The port opening is approximately 11” x 19” (279
mm x 482 mm).
TABLE 4 - STANDARD TANK OPTIONS (STANDARD AND METRIC)
To Next Page
Loading...