JOHNSON CONTROLS
3
FORM 50.40-OM1 (713)
ISSUE DATE: 07/17/2013
CHANGEABILITY OF THIS DOCUMENT
In complying with Johnson Controls’ policy for contin-
uous product improvement, the information contained
in this document is subject to change without notice.
Johnson Controls makes no commitment to update or
provide current information automatically to the man-
ual owner. Updated manuals, if applicable, can be ob-
tained by contacting the nearest Johnson Controls Ser-
vice office or accessing the Johnson Controls QuickLIT
website at http://cgproducts.johnsoncontrols.com.
Operating/service personnel maintain responsibility for
the applicability of these documents to the equipment.
If there is any question regarding the applicability of
these documents, the technician should verify whether
the equipment has been modified and if current litera-
ture is available from the owner of the equipment prior
to performing any work on the chiller.
CHANGE BARS
Revisions made to this document are indicated with a
line along the left or right hand column in the area the
revision was made. These revisions are to technical in-
formation and any other changes in spelling, grammar
or formatting are not included.
To Next Page
Loading...