Need help?Do you have a question about the Johnson Matthey TRACERCO T401 and is the answer not in the manual?
General| Detector Type | Scintillation Detector |
|---|---|
| Display | LCD |
| Weight | 2.8 kg (6.2 lbs) |
| Protection Rating | IP65 |
| Accuracy | ±10% |
| Repeatability | ±5% |
| Power Supply | Rechargeable Lithium-Ion Battery |
| Output Signal | USB |
Describes the monitor's alarm function, settable levels, and activation indicators.
Covers the requirement for annual calibration and how the calibration due date is displayed.
Details the monitor's startup sequence and initial display checks.
Explains selecting specific radionuclides for accurate contamination measurements.
Details the procedure for performing and storing a background radiation count.
Guides on selecting nuclides and performing measurements in Bq/cm² or cps.
Lists pre-calibrated nuclides and explains options for custom calibrations.
Explains how to set and configure alarm trip levels for CPS and Bq/cm² using the sounder function.
Covers statutory requirements for annual inspection, testing, repair, and calibration using reference plaques.
To Next Page
