EasyManua.ls Logo

Johnson Pump SPX FLOW 500 GPH - ACCESSORIES; Automatic Float Switch AS888; Electro-Magnetic Float Switch; Waste handling;material recycling

Johnson Pump SPX FLOW 500 GPH
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
Bilge Pump Cartridge - Instruction Manual
Übersetzung der Original-BetriebanleitungenOriginal instructions
> English
ACCESSORIES
Automatic Float Switch AS888
Part. nr.:
34-888
The automatic switch AS888
protects electrically operated pumps
and gives fully automatic operation.
The AS888 is made
of corrosion resistant materials.
Part. nr:
(3-Way ON-AUTO-OFF)
12V
34-1224
24V
34-1225
The panel combined with automatic
switch AS888 is an excellent
installation for your boat.
Installation of SPX FLOW
Johnson Pump submersible
bilge pump/automatic switch
AS888/ Panel
See page 18
Always install switch AS888, panel
and fuses between the positive
(+) terminal of the battery and
the positive (+) connection of the
pump (brown wire). The negative
(-) connection (black wire) of the
pump to be connected directly
to the negative (-) terminal of the
battery. Fuse size applies to pump
specification.
Electro-Magnetic Float Switch
Part. nr.:
12V
34-1900B-12V
24V
34-1900B-24V
The electro-magnetic float switch
is the same switch as on
"Cartridge Combo". As a separate
accessory it is possible to attach
the switch to all pumps in the
SPX FLOW Johnson Pump
"Cartridge" & "Heavy Duty" series.
Waste handling/material recycling
At the products end of life, please dispose
of the product according to applicable law.
Where applicable, please disassemble the
product and recycle the parts material.

Related product manuals