INSTALLATION
Remove transport bolts
You must remove the transport bolts from the backside before
using the product.
！
Warning!
Loosen the 4
transport bolts
with a spanner.
Remove the bolts
including the rubber
parts and keep them
for future use.
Close the holes
using the cover
caps.
Levelling the washing machine
The lock nuts on all four feet must be screwed tightly against
the housing.
！
Warning!
1. Loosen the lock nut.
2. Turn the foot until it reaches the
floor.
3. Adjust the legs and lock the nuts
with a spanner. Make sure the
machine is level and steady.
Connect the water supply hose
•Do not kink, crush or modify water inlet hose.
•To prevent leakage or water damage, follow the instructions
in this chapter
！
Warning!
Connect the water
supply hose to the water
inlet valve and a water
tap with cold water as
indicated.
Note!
Connect manually, do not use tools. Check if the connections
are tight.
To Next Page
Loading...
