43
properly or if it appears damaged, check that
the power supply cable is in good condition;
in case of doubt, contact an Authorized JOHN-
SON Appliances Technical Assistance Center.
Do not pull the appliance or the cable to remo-
ve the plug from the socket.
Do not start or turn off the appliance by inser-
ting or disconnecting the power plug.
The power cable must be unrolled along its
entire length in order to avoid overheating.
The power cord must not be placed near heat
sources and / or sharp surfaces. If the power
supply cable is damaged, replace it, which
must be carried out by an Authorized Techni-
cal Assistance Center.
In case of breakdown and / or malfunction,
turn off the appliance and contact the Autho-
rized Technical Assistance Center. Any tampe-
ring or interventions carried out by unqualified
personnel will invalidate the warranty rights.
Do not repair the appliance by yourself. Do not
open the unit to avoid any malfunctions or da-
mage to people, animals and objects. For any
problem, always contact an Authorized JOHN-
SON Appliances Technical Assistance Center.
To clean the device, use only a soft, non-abra-
sive cloth.
When the device is unusable and you want to
eliminate it, remove the cables and dispose of
To Next Page
Loading...
