To Next PageTo Next Page
Need help?Do you have a question about the Johnson TEIDE Series and is the answer not in the manual?
General| Brand | Johnson |
|---|---|
| Model | TEIDE Series |
| Category | Air Conditioner |
| Language | English |
Essential safety guidelines for installing and using the air conditioning unit.
Description of buttons and their corresponding functions on the remote control.
Instructions for using the emergency button when the remote fails.
Information on space requirements, ventilation, and handling refrigerants.
Checking cabling and using leak detection methods for flammable refrigerants.
Steps for safely removing and evacuating refrigerant from the system.
Key points for professional installation, handling refrigerants, and safety.
Guidelines for refrigerant charge size and required room area.
Safety guidelines for site and operation during installation.
Instructions for mounting the indoor unit's wall plate securely.
Procedure for drilling the wall hole for refrigerant piping and drainage.
Choosing a suitable site for the outdoor unit, considering heat, wind, and noise.
Evacuating the system using a vacuum pump to remove air and moisture.
Checks to perform on electrical, installation, and refrigerant systems before testing.
Steps for operating the unit in COOL and HEAT modes to verify functionality.
Table listing appliance issues and their potential causes.
List of error codes shown on the indoor unit display and their meanings.
Conditions and situations that are not covered by the manufacturer's warranty.
