52
The corresponding indicator will light up:
Cool: cools the room to the set temperature.
Dehum: reduces the humidity in the room.
Fan: circulates the air in the room without cooling.
UP ARROW button and DOWN ARROW button
Press these buttons to adjust the temperature and set the time.
The temperature can be adjusted between 17 ° C and 30 ° C (62 ° F and 86 ° F) when the
air conditioner is in “cooling” mode.
Press the “COOL” button until the “Cool” mode is selected.
Press the “UP ARROW and DOWN ARROW” buttons to select the temperature.
NOTE: The temperature cannot be adjusted when the air conditioner is in “Fan o
Dehum” mode.
NOTE: the “UP ARROW and DOWN ARROW” buttons, if pressed simultaneously, allow you
to select the temperature display in ºC or ºF.
Fan speed button (SPEED button)
In “cooling and fan” modes, press this button to adjust the fan speed, low (low) or high
(high).
In dehumidification mode it is not possible to adjust the ventilation, the unit will always
choose the low ventilation speed.
TIMER button
Allows you to program a time (from 1 hour to 24 hours) for switching the appliance on
or off. When a delay is programmed, the timer indicator light turns on.
While the air conditioner is running:
press the “TIMER” button
press the “UP / DOWN ARROW” buttons to select the number of hours in which you want
the air conditioner to continue to operate before turning off.
While the air conditioner is off:
press the “TIMER” button.
press the “UP / DOWN ARROW” buttons to select the number of hours you want the air
conditioner to remain off before switching on.
NOTE: Wait approximately 5 seconds for the power-up time to be saved.
To cancel the “TIMER”:
press the “TIMER” button once, the remaining hours will be canceled.
DISPLAY OF THE CONTROL PANEL
Displays the set temperature in Fahrenheit or Celsius or the hours remaining in a delay.
Sleep mode
In “COOL” mode (COOLING), press the “TIMER” and “DOWN ARROW” keys to select this
mode, the relative icon will light up and the device will operate economically and quietly
(suitable for the night).
NOTE: it is not
possible to activate the “SLEEP” mode when the unit works in “Dehum-
FICATION” or “VENTILATION”.
Forced start mode
The “TIMER and MODE” buttons, if pressed at the same time, allow the machine to be
forcibly switched on.
To Next Page
Loading...
