MANUAL
STARTER
REMOVAL
Remove the plunger, spring, tappet, and cam from
25/30
MODELS
the housing, and the screw from the cam.
>
33744
m WARNING m
Avoid accidental starting
of
engine while
servicing,
twist
and remove all spark plug
leads.
Remove the three starter housing retaining
screws. Lift starter housing from engine.
22095
Using a screwdriver, apply pressure to one side of
the starter
lockout locking tab. While applying
pressure, pull on cable until tab is clear of starting
housing.
813149
E
o
o
:;j
)(
~
Qj
~
i::i.
295
~
To Next Page
Loading...