Johnson J15RSUA User Manual

120
POWERHEAD
TORQUE CHART
TORQUE CHART
IMPORTANT: For fasteners not listed, refer to STANDARD TORQUE SPECIFICATIONS on p. 20.
Description 9.9/15 Lubricant
Connecting Rod Cap Screws
60 to 70 in. lbs.
(7 to 7.5 N·m)
Apply Evinrude/Johnson
Outboard Lubricant to threads
Lower Crankcase Head Screws
60 to 84 in. lbs.
(7 to 9 N·m)
Apply Gasket Sealing
Compound to threads.
Cylinder Head Screws
216 to 240 in. lbs.
(25 to 27 N·m)
Install screws dry.
Do not use sealants on
threads.
Powerhead Retaining Screws
60 to 84 in. lbs.
(7 to 9 N·m)
Apply Gasket Sealing Com-
pound to threads.
Main Bearing Screws
144 to 168 in. lbs.
(16 to 19 N·m)
Apply Gel Seal II to threads
Inner Exhaust Tube Screws
60 to 84 in. lbs.
(7 to 9 N·m)
Cylinder Head Cover Screws
60 to 84 in. lbs.
(7 to 9 N·m)
Apply Gasket Sealing Com-
pound to threads.
Exhaust Cover Screws
90 to 130 in. lbs.
(11 to 14 N·m)
Bypass Cover Screws
60 to 84 in. lbs.
(7 to 9 N·m)
Intake Manifold Screws and Nuts
60 to 84 in. lbs.
(7 to 9 N·m)

Johnson J15RSUA Specifications

General

Brand	Johnson
Model	J15RSUA
Category	Outboard Motor
Language	English