EasyManuals Logo

Johnson JRC188ENW User Manual

Johnson JRC188ENW
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
6
V.1
2.INSTALLATION
2.1 Location
When selecting a position for your unit you should make sure the
floor is flat and firm, and the room is well ventilated. Avoid locating
your unit near a heat source, e.g. cooker, boiler or radiator. Also
avoid direct sunlight as it may increase the electrical consumption.
Extreme cold ambient temperatures may also cause the unit not to
perform properly. The unit is not designed for use in a garage or
outdoor installation. Do not drape the unit with any covering.
When installing the unit, ensure that 10cm of free space is left at
both sides, 10 cm at the rear and 30 cm at the top of the unit.
This will allow cold air to circulate around the wine cooler and
improve the efficiency of the cooling process.
2.2 Installation of the door handle (optional)
1) Remove the plugs from the door
handle holes.
2)Insert the handle into
the screw holes and
tighten it to secure it.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Johnson JRC188ENW and is the answer not in the manual?

Johnson JRC188ENW Specifications

General IconGeneral
BrandJohnson
ModelJRC188ENW
CategoryRefrigerator
LanguageEnglish

Related product manuals